Sourcing Forging in Vietnam
What an industrial buyer needs to know before requesting quotations for forging from Vietnam-based suppliers.
Overview
Sourcing forging from Vietnam is one of the recurring decisions of any industrial buyer who needs to balance unit cost, quality control and lead time. This page collects what an EU buyer should know before opening a Request for Quotation for forging suppliers in Vietnam: typical materials, tolerances expected on the drawing, certifications worth asking for, current price positioning and shipping turnaround.
From a pure cost angle, Vietnam prices forging roughly 40–60% lower compared to the average European baseline. Real numbers depend on volume, alloy and surface treatment, but this gap is what justifies a sourcing exercise toward Vietnam in the first place. Cost is rarely the only variable: lead time, audit access, certifications and supplier capacity at the right volume usually decide which suppliers actually make the shortlist.
A typical first article from a Vietnam-based forging shop takes 40–120 working days, plus 28–42 shipping days of shipping to central Europe. Series production lead time depends on volume and capacity reservation: most established shops want a forecast horizon of 60 to 90 days to plan raw materials and surface treatment subcontractors.
When to choose this process
Choose forging when fatigue strength, impact resistance and grain integrity matter (transmission, fasteners, oil & gas).
Forging deforms hot metal under high pressure to align grain flow with the part shape, giving the highest mechanical strength of any process. Open-die suits big shafts and rings, closed-die handles series of structural parts.
Why source here — Vietnam
- EU-Vietnam FTA (EVFTA): most tariffs eliminated by 2027
- Hourly cost 30–40% below China
- Lower IP risk than China, English-friendly export staff
- Korean and Japanese investors raised QA bar across clusters
What to watch out for
- Sea freight 28–42 days, sensitive to typhoon season
- Limited capacity on very large castings and forgings
- Power outages possible in Q2/Q3 — check supplier backup
Typical materials
- Carbon steel C45/42CrMo4
- Stainless 17-4PH
- Aluminium 6082/7075
- Titanium
- Nickel alloys
Typical tolerances
Net forging ±0.5 mm; finish-machine bearing/sealing surfaces.
Certifications to ask for
- ISO 9001
- EN 10204 3.1/3.2 mill certs
- NORSOK for O&G
- IATF 16949 (top tier)
- RoHS, REACH
Frequently asked questions
Is it worth sourcing forging from Vietnam?
It pays off when the lower hourly rate (40–60% lower) beats the logistic friction (28–42 shipping days) and the selected supplier holds the required certifications (ISO 9001, IATF 16949 (top tier)). Below ~200 pcs/year it often doesn't; above ~1,000 pcs/year the math almost always tips in favour.
Forging vs casting?
Forging is stronger but limited in geometry; casting offers complex shapes at lower strength. For load-critical rotating parts, forge.
Vietnam or China?
Vietnam if you want China+1 risk diversification, smaller volumes with friendlier IP, or to benefit from EVFTA duties. China if you need full vertical integration or massive volumes.
Other countries
Other processes
Editorial market guide. Supplyria is a marketplace; we don't list private suppliers on this page. Cost ranges and lead times are indicative and based on public industry benchmarks.