Sourcing Laser Cutting in Vietnam
What an industrial buyer needs to know before requesting quotations for laser cutting from Vietnam-based suppliers.
Overview
Sourcing laser cutting from Vietnam is one of the recurring decisions of any industrial buyer who needs to balance unit cost, quality control and lead time. This page collects what an EU buyer should know before opening a Request for Quotation for laser cutting suppliers in Vietnam: typical materials, tolerances expected on the drawing, certifications worth asking for, current price positioning and shipping turnaround.
From a pure cost angle, Vietnam prices laser cutting roughly 40–60% lower compared to the average European baseline. Real numbers depend on volume, alloy and surface treatment, but this gap is what justifies a sourcing exercise toward Vietnam in the first place. Cost is rarely the only variable: lead time, audit access, certifications and supplier capacity at the right volume usually decide which suppliers actually make the shortlist.
A typical first article from a Vietnam-based laser cutting shop takes 3–14 working days, plus 28–42 shipping days of shipping to central Europe. Series production lead time depends on volume and capacity reservation: most established shops want a forecast horizon of 60 to 90 days to plan raw materials and surface treatment subcontractors.
When to choose this process
Use for flat blanks, cut-outs and tubular skeletons whenever DXF turnaround needs to be fast.
Laser cutting delivers precise, clean cuts on metal sheet from 0.5 to 25 mm and on tubes. Fiber lasers dominate on steel and stainless; CO₂ still has a role on thick non-ferrous and acrylics.
Why source here — Vietnam
- EU-Vietnam FTA (EVFTA): most tariffs eliminated by 2027
- Hourly cost 30–40% below China
- Lower IP risk than China, English-friendly export staff
- Korean and Japanese investors raised QA bar across clusters
What to watch out for
- Sea freight 28–42 days, sensitive to typhoon season
- Limited capacity on very large castings and forgings
- Power outages possible in Q2/Q3 — check supplier backup
Typical materials
- Mild steel up to 25 mm
- Stainless up to 20 mm
- Aluminium up to 15 mm
- Brass, copper (fiber)
- Galvanised steel
Typical tolerances
±0.05 mm on thin sheet, ±0.2 mm on 20 mm steel; HAZ < 0.3 mm.
Certifications to ask for
- ISO 9001
- EN 1090 (when cut parts feed structural assemblies)
- IATF 16949 (top tier)
- RoHS, REACH
Frequently asked questions
Is it worth sourcing laser cutting from Vietnam?
It pays off when the lower hourly rate (40–60% lower) beats the logistic friction (28–42 shipping days) and the selected supplier holds the required certifications (ISO 9001, IATF 16949 (top tier)). Below ~200 pcs/year it often doesn't; above ~1,000 pcs/year the math almost always tips in favour.
Why is my laser quote per metre, not per part?
Cost scales with cutting length and material thickness. Some shops add a setup fee and a sheet utilisation surcharge for very small or oddly shaped parts.
Vietnam or China?
Vietnam if you want China+1 risk diversification, smaller volumes with friendlier IP, or to benefit from EVFTA duties. China if you need full vertical integration or massive volumes.
Other countries
Other processes
Editorial market guide. Supplyria is a marketplace; we don't list private suppliers on this page. Cost ranges and lead times are indicative and based on public industry benchmarks.