Sourcing Plastic Injection Moulding in Turkey
What an industrial buyer needs to know before requesting quotations for plastic injection moulding from Turkey-based suppliers.
Overview
Sourcing plastic injection moulding from Turkey is one of the recurring decisions of any industrial buyer who needs to balance unit cost, quality control and lead time. This page collects what an EU buyer should know before opening a Request for Quotation for plastic injection moulding suppliers in Turkey: typical materials, tolerances expected on the drawing, certifications worth asking for, current price positioning and shipping turnaround.
From a pure cost angle, Turkey prices plastic injection moulding roughly 20–35% lower compared to the average European baseline. Real numbers depend on volume, alloy and surface treatment, but this gap is what justifies a sourcing exercise toward Turkey in the first place. Cost is rarely the only variable: lead time, audit access, certifications and supplier capacity at the right volume usually decide which suppliers actually make the shortlist.
A typical first article from a Turkey-based plastic injection moulding shop takes 30–90 working days, plus 3–7 shipping days of shipping to central Europe. Series production lead time depends on volume and capacity reservation: most established shops want a forecast horizon of 60 to 90 days to plan raw materials and surface treatment subcontractors.
When to choose this process
Pick injection when volumes are >5k pcs/year and geometry tolerates 0.5–2° draft and shrinkage compensation.
Injection moulding melts polymer pellets and injects them into a steel/aluminium mould. Tooling is expensive (€8k–€80k+) but unit cost drops dramatically above 5–10k pcs/year.
Why source here — Turkey
- Hourly labour cost 50–70% below EU average
- Customs union with EU (no import duties on most industrial goods)
- 3–7 day road shipping to central Europe
- Mature steel and forging base, dozens of EN 1090 shops
What to watch out for
- Currency volatility (TRY) — fix prices in EUR/USD
- Quality dispersion: select certified shops, audit before first PO
Typical materials
- ABS
- PP
- PA6/PA66 (+GF)
- POM
- PC
- PEEK (high-end)
Typical tolerances
±0.05–0.2 mm depending on size; mind shrinkage and warpage.
Certifications to ask for
- ISO 9001
- ISO 13485 (medical)
- FDA, EU 10/2011 (food contact)
- IATF 16949
- EN 1090
- PED 2014/68/EU
Frequently asked questions
Is it worth sourcing plastic injection moulding from Turkey?
It pays off when the lower hourly rate (20–35% lower) beats the logistic friction (3–7 shipping days) and the selected supplier holds the required certifications (ISO 9001, IATF 16949). Below ~200 pcs/year it often doesn't; above ~1,000 pcs/year the math almost always tips in favour.
How much does an injection mould cost?
Single cavity prototype mould €8–15k, 2–4 cavity production mould €25–60k, hot-runner 8+ cavities €70k and up. Steel grade and life cycle drive cost.
Turkey or Eastern Europe — which one?
Turkey wins on heavy steel, large forgings and price; Poland/Czech win on machined precision parts and proximity to Germany.
Other countries
Other processes
Editorial market guide. Supplyria is a marketplace; we don't list private suppliers on this page. Cost ranges and lead times are indicative and based on public industry benchmarks.